How to Replace an Oil Pump


Below guide will teach you How to Replace an Oil Pump. Please follow the instructions carefully.

Things You’ll Need:

  • Combination Wrench Set
  • Drain Pan
  • Scraper
  • Socket and Ratchet Set
  • Oil Filter
  • Oil Pan Gasket
  • Oil Pump Gasket
  • Oil Pump

Estimated Costs:

  • DIY Costs: Est. $310.99 parts only
  • Shop Costs: Est. $685.54 parts and labor

Instructions:

  • Prop the engine hood up and look for the engine oil reservoir.
  • Pull the dipstick out of the reservoir and turn the engine on so that the oil becomes warm.
  • Place a drain pan under the engine oil reservoir and unplug oil fill cap and also the drain plug.
  • Once the oil is drained out, remove the drain pan.
  • Raise the front of the vehicle with jack and secure it on jack stands. Chock the rear wheels.
  • Take the oil pan gasket off with the help of gasket scraper tool.
  • Wipe off the mounting surface on engine block to remove the remaining particles of the old gasket with scraper tool.
  • Next, you need to take the oil pump out with a suitable tool.
  • Position the new engine oil pump in place and secure it.
  • Position the new gasket on the mounting surface of engine block and carefully adjust the oil pan back onto the engine block.
  • Recap the engine oil fill and turn the engine on.
  • Check the oil level again and also the surrounding areas for any signs of leak.

Tips & Warning

  • Don’t ever forget to use protective clothing while working with your vehicle. Use safety goggles, latex gloves, or closed toe shoes to prevent injuries.

Be Sociable, Share!

Further Reading

This entry was posted in Mechanical, Lubrication & Cooling and tagged , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>