How to Replace a Brake Caliper


Below guide will teach you How to Replace a Brake Caliper. Please follow the instructions carefully.

Things You’ll Need:

  • Combination Wrench Set
  • C-Clamp
  • Socket and Ratchet Set
  • Jack Stand Set
  • Flat Head Screwdriver
  • 1/2 in. Drive Torque Wrench
  • Brake Caliper
  • Brake Fluid

Estimated Costs:

  • DIY Costs: Est. $243.66 parts only
  • Shop Costs: Est. $494.67 parts and labor

Image may not be specific to your car.

Instructions:

  • Secure the vehicle on a flat surface. Apply parking brake.
  • Loosen the lug nuts on the front wheels before lifting the front side with floor jack.
  • Put logs behind rear wheels and raise the front of the vehicle with floor jack.
  • Prop the vehicle on jack stands to ensure your safety during the repair work.
  • Take the loosen lug nut away and take the fronts wheels off the vehicle.
  • Examine the brake caliper carefully to spot any signs of binding. Observe if there is rust or uneven brake pad damage.
  • Take the brake caliper out by removing the sliding bolts. You may need to disconnect the disc pads as well if they are connected to the caliper.
  • Secure the caliper with a kind of support. Never let it hang by the brake hose.
  • Wipe off the sliding bolts properly. Apply grease or oil to sliding bolts.
  • Connect the disc pad with new brake caliper and reassemble the new caliper over the brake disc (rotor).
  • Secure the caliper on the bracket with sliding bolts.
  • Detach the brake line from old caliper and reattach it to the new caliper. It is better to use new copper washers. Fasten the banjo bolt.
  • Repeat the same process on the other side and don’t forget to bleed the brakes.
  • Fix the wheels and secure them properly with lug nuts.
  • Take the jack stands away and slide down the floor jack.
  • Take a small drive and make certain that the brake pedal is not loose and new brake caliper are properly installed.

Tips & Warning

  • Always use safety goggles, latex gloves and closed toe shoes. These will prevent you from sustaining any severe injuries during the repair work.


Be Sociable, Share!

Related Posts

This entry was posted in Hydraulic System and tagged , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>